What if the advertising engraving machine is too dusty?

In the daily use of the advertising engraving machine, it will inevitably generate a lot of dust. After a long time, the machine will precipitate. For better maintenance and maintenance of the machine, how should we clean the dust in the engraving machine?

1. First of all, the dust on the tray of the advertising engraving machine does not matter, but it can be cleaned anyway, but it is not recommended to clean the dust inside the machine. It is easy to scratch the laser head when it is improperly removed. In severe cases, the laser cannot be accurate when reading and writing data. Positioning.

2, Secondly, as long as the dust does not fall on the surface of the laser head, it does not affect the use. The safest method is to use the balloon to invert the laser engraving machine (laser head down) (a tool for cleaning digital SLR CCD is very cheap) Blow off the dust.

3. In addition, special attention should be paid to the replacement of water and the cleaning of the water tank (it is recommended to clean the water tank once a week and replace the circulating water once).

How to say that the advertising engraving machine is too dusty, how do we say how to clean the advertising engraving machine water tank?

First turn off the power, unplug the water inlet pipe, let the water in the laser tube automatically flow into the water tank, open the water tank, take out the water pump, and remove the dirt on the water pump. Clean the water tank, replace the circulating water, return the water pump to the water tank, insert the water pipe connected to the water pump into the water inlet, and arrange the joints. Power the pump separately and run for 2-3 minutes.

What is the impact of advertising engraving machine dust?

The advertising engraving machine dust mainly affects the heat dissipation of the electronic components and the sensitivity of the photosensitive elements. Common phenomena include malfunction of the optical inspection, the CPU fan of the computer does not turn, and so on.

In addition to dust affecting the processing process, there are some factors that affect the advertising engraving machine. So what are the factors that affect the processing of advertising engraving machines?

1. The influence of the power supply of the advertising engraving machine on the processing is the most direct, mainly manifested by the disorder of the control system. Each electronic device and each functional component of the CNC control system has a certain voltage and frequency range. The overload operation of any component inevitably leads to instability of the entire system. A common phenomenon is machining offset.

2. The influence of the vibration of the advertising engraving machine is reflected in the frequent broken knife and the surface is not smooth. The common reason is that the machine is touched during the machining process, the level of machine installation is unqualified, and there is a punch around.

3, the advertising engraving machine generally does not appear the tool collapse and the broken edge caused the engraving surface is not smooth, there are jagged phenomena. It is found that the engraved surface is not smooth and has a jagged phenomenon. It should be checked whether the model size of the knives used is suitable. If the shank is extended too long, the knives will be deformed at the processing time, which will result in a machined surface. Not smooth and jagged.

4, the advertising engraving machine ambient temperature and humidity mainly affect the performance of the control system, the performance of the drive motor. When the ambient temperature exceeds 40 degrees, the control system may have erroneous control, and the driving torque of the drive motor may not reach the rated value.