Common troubles when operating woodworking engraving machines

    Even if you are a very skilled worker, you should be able to carry out specific analysis on how to use the machine, including how to maintain it after years of disrepair. Sometimes you have to encounter specific problems. When operating the woodworking engraving machine, the workers found that the conventional failure problems were actually many, because the operation was not standardized, or the usual maintenance was not timely.
    First of all, let's pay attention to the most important motor. Due to the long-term use, sometimes it will feel that the motor has no strength or some stuck condition when it is turned. First, do not blindly disassemble, check the circuit, including the motor circuit. Is there a problem with the connection, and if the wire is broken due to disrepair, the wire is short-circuited.
    Secondly, if there is no problem with the wiring and external wiring of the motor, it depends on whether the machine itself is overloaded. Long hours of work will definitely consume the energy of the machine itself. If you find that there is no problem after careful inspection, it is that there is a fault inside the machine, and it must be repaired or repaired in time.
    This type of electronic engraving tools are often used in professional factories or in some large enterprises. When purchasing, they are basically added in batches. Therefore, when selecting woodworking engraving machine manufacturers in the early stage, not only should they be inspected. The quality of the product, but also to sign detailed contract details with the other party, so as to avoid any problems in the machine, resulting in the impact of the entire project efficiency after repair.

Tool damage to the countertop prevention

      Engraving machine, everyone is no stranger, is widely used in various factories, there are many types of engraving machines, many types of table, there are many table tops and configurations, then the most basic is aluminum profiles, aluminum profiles can be fixed a variety of materials. But thin and small is not so well controlled, but each type of countertop has the benefit of each type of countertop. There is also a tool under the spindle, carving each raw material, carving each flower shape requires different tools, just like the engraving machine has a variety of configurations, then we need a variety of tools, the table is diverse How can we protect the countertops and knives of our engraving machine? Let's talk about the prevention of engraving machine tools on the engraving machine table! !
When positioning the Z axis of the engraving machine, do not let the knife touch the surface of the raw material, but remove the material so that the knife directly touches the table. It can be touched. Don't be deeper. In this place, the Z axis returns to 0. Then increase the corresponding height according to the lack of depth set in Venter. For example, in the steady state setting cutting depth is 10, then here we accurately increase the knife by 10, and then let the Z axis return to 0, which is the origin of the Z axis. The lowest point of the engraving machine is the first place where the door is zeroed, according to the depth of the setting. It is just the top of the countertop, which ensures that the information is completely etched without hurting the engraving machine.