What are the characteristics of a highly qualified laser cutting machine?

With the wide application of laser cutting machines, many manufacturers have focused on the development of laser cutting machine market. Many users also look at the laser cutting machine when they choose to buy it. The root cause is that they don't know enough about the machine. So, what kind of machine can be considered qualified in the end, what characteristics should the qualified laser cutting machine have? The author gives you an analysis and explanation:

First of all, it is necessary to ensure that the cutting surface of the material cut by the laser cutting machine is smooth, and the laser-cut cutting surface has no burr method;

Secondly, the slit is fine, and the slit of the laser cutting is generally 0.10-0.20 cm;

Third, it is suitable for the processing of large-sized products: the mold manufacturing cost of large-sized products is very high, laser processing does not require any mold manufacturing, and laser processing completely avoids the collapse formed when the material is punched and sheared, which can greatly reduce the production of the enterprise. Cost increases the grade of the product;

Fourth, the thermal deformation is small, the laser processing laser slit is fine, the speed is fast, and the energy is concentrated, so the heat transferred to the material to be cut is small, and the deformation of the material is also very small;

Fifth, it is very suitable for the development of new products, shortening the development cycle: once the product drawings are formed, laser processing can be performed immediately, and you can get the new products in the shortest time;

Sixth, saving materials: laser processing using computer programming, can be used to set the material of different shapes of products, to maximize the utilization of materials.

Laser engraving machine precautions

The use of laser engraving machines can improve the efficiency of engraving, reduce the temperature of the non-metallic materials being carved, and reduce the deformation and internal stress of the engraved objects.

So what issues should you pay attention to when using the laser engraving machine? The author has compiled 8 notes and hopes to help everyone.

1. after each boot, it is necessary to check whether the submersible pump can discharge water. If it does not discharge water, it is forbidden to start the work: and ensure that the circulating water has moderate water temperature and dry water. It must be free of impurities and change the circulating water regularly.

2. When using the eagle, you must turn the fan over to avoid contaminating the lens and focusing mirror.

3. It is strictly forbidden to place flammable or explosive materials near the equipment; when the machine is working, it is necessary to cover the top cover of the machine to prevent laser misalignment from fire or injury.

4. When the voltage is unstable, stop the power on. If there are special conditions, use a voltage regulator.

5. During the working process, the operator must check the working condition of the machine at any time, such as whether the paper laid on the hook can be blocked by the air pump, the abnormal sound of the machine, the water temperature of the circulating water, and so on.

6. The environment in which the machine is located is free of pollution, no strong electricity, strong magnetic interference, etc.

7. the continuous use of laser engraving machine working time should not exceed 5 hours, the machine needs half an hour in the middle.

8. It is forbidden to turn on the maximum state of the ammeter to avoid breakdown of the laser power.