What if the advertising engraving machine is too dusty?

In the daily use of the advertising engraving machine, it will inevitably generate a lot of dust. After a long time, the machine will precipitate. For better maintenance and maintenance of the machine, how should we clean the dust in the engraving machine?

1. First of all, the dust on the tray of the advertising engraving machine does not matter, but it can be cleaned anyway, but it is not recommended to clean the dust inside the machine. It is easy to scratch the laser head when it is improperly removed. In severe cases, the laser cannot be accurate when reading and writing data. Positioning.

2, Secondly, as long as the dust does not fall on the surface of the laser head, it does not affect the use. The safest method is to use the balloon to invert the laser engraving machine (laser head down) (a tool for cleaning digital SLR CCD is very cheap) Blow off the dust.

3. In addition, special attention should be paid to the replacement of water and the cleaning of the water tank (it is recommended to clean the water tank once a week and replace the circulating water once).

How to say that the advertising engraving machine is too dusty, how do we say how to clean the advertising engraving machine water tank?

First turn off the power, unplug the water inlet pipe, let the water in the laser tube automatically flow into the water tank, open the water tank, take out the water pump, and remove the dirt on the water pump. Clean the water tank, replace the circulating water, return the water pump to the water tank, insert the water pipe connected to the water pump into the water inlet, and arrange the joints. Power the pump separately and run for 2-3 minutes.

What is the impact of advertising engraving machine dust?

The advertising engraving machine dust mainly affects the heat dissipation of the electronic components and the sensitivity of the photosensitive elements. Common phenomena include malfunction of the optical inspection, the CPU fan of the computer does not turn, and so on.

In addition to dust affecting the processing process, there are some factors that affect the advertising engraving machine. So what are the factors that affect the processing of advertising engraving machines?

1. The influence of the power supply of the advertising engraving machine on the processing is the most direct, mainly manifested by the disorder of the control system. Each electronic device and each functional component of the CNC control system has a certain voltage and frequency range. The overload operation of any component inevitably leads to instability of the entire system. A common phenomenon is machining offset.

2. The influence of the vibration of the advertising engraving machine is reflected in the frequent broken knife and the surface is not smooth. The common reason is that the machine is touched during the machining process, the level of machine installation is unqualified, and there is a punch around.

3, the advertising engraving machine generally does not appear the tool collapse and the broken edge caused the engraving surface is not smooth, there are jagged phenomena. It is found that the engraved surface is not smooth and has a jagged phenomenon. It should be checked whether the model size of the knives used is suitable. If the shank is extended too long, the knives will be deformed at the processing time, which will result in a machined surface. Not smooth and jagged.

4, the advertising engraving machine ambient temperature and humidity mainly affect the performance of the control system, the performance of the drive motor. When the ambient temperature exceeds 40 degrees, the control system may have erroneous control, and the driving torque of the drive motor may not reach the rated value.

How does the advertising engraving machine distinguish the quality?

1. The quality of the advertising engraving machine first needs to look at the overall equipment configuration, and secondly, the assembly accuracy of the equipment. To see these things, you need to check the repeatability of the device, the positioning accuracy, the perpendicularity between the axes, and the flatness.

2. After the assembly and debugging of the advertising engraving machine, it is necessary to see if the surface of the advertising engraving machine is flattened. This is very important to ensure the flatness.

3. Positioning accuracy is also very important. The positioning accuracy affects the workpiece size error when the advertising engraving machine is processed. The higher the precision, the smaller the error and the better the product quality. The accuracy of the lead screw, the compensation ability of the control system, and the change of the ambient temperature mainly determine the positioning accuracy of the advertising engraving machine.

4. The transmission mode of the advertising engraving machine has a rack drive and a screw drive. The screw engraving advertising engraving machine is more accurate than the rack.
How to distinguish the quality of the advertising engraving machine?

1. Some advertising engraving machine manufacturers boast that they are high-tech enterprises, but they cover up and shirk when they ask for on-the-spot investigations. Why not let customers visit? Because they don't have their own factories, they are OEM, or their factory production equipment is worn out, affecting their sales. To produce a good quality advertising engraving machine, of course, it is inseparable from the professional advertising engraving machine production equipment. With the professional equipment for producing advertising engraving machines, it is naturally equipped with relevant technicians.

2, some small advertising engraving machine manufacturers quote, always like to say that their advertising engraving machine is a computer control, is a brand-name spindle, is the imported guide screw, but is not willing to say the specific brand and model. Because they need to use these famous brands, imports and other words to cover up the low-end configuration of their advertising engraving machine. General accessories will have a genuine logo. Such an advertising engraving machine will not choose.

3, there are some advertising engraving machine manufacturers and customers recommend Weihong control software, but its price is much cheaper than DSP. At this time everyone will have a long heart. Such an advertising engraving machine Weihong software is likely to be pirated. Don't think that piracy is okay, and there are many problems with piracy. For the difference of several thousand dollars, we suggest to choose genuine Weihong control software.

I hope that the above content can be helpful to everyone. Buying an advertising engraving machine still needs to be long-sighted. After all, it is not a problem of a few dollars. Don't buy cheap inferior advertising engraving machines for the sake of cheaper.