The high-efficiency machining performance of CNC carpenter engraving machine has brought more profits to many customers. Many customers see the effects of peers and understand and purchase equipment. However, the malls that are mixed with the dragons also bring certain difficulties to the customers to purchase equipment. If you are not careful, you will buy one because of the attractive price of low prices. Invisible equipment not only brings economic losses to customers, but also more important delays in production.
Introduction to the reasons and solutions for the spindle rotation of the carpenter engraving machine
As a high-tech automatic mechanical equipment, CNC engraving machine is applied to various occupations and categories, bringing greater profits to customers. However, as a mechanical device that runs all year round, there must be a certain loss of consumables and spare parts. For example, spindle motors, tools, sliders, etc. are the primary consumables for engraving machines. Therefore, as a user of the engraving machine, it is very important to better understand and grasp the replacement and maintenance methods of these consumables. Today we will introduce the problems and solutions presented by the CNC motor of the CNC engraving machine.
Fault phenomenon: The spindle motor of the CNC carpenter engraving machine stopped suddenly, and the inverter showed ERR 01; sometimes the motor was energized with a humming sound, but it did not turn.
Solution:
1. The spindle motor is disconnected from the inverter's three-wire cable connector. Solution: Re-plug or re-connect and try again.
2. The inner lead of the CNC engraving machine spindle motor is welded. Recognition method: multimeter between the three-core resistance of the spindle motor socket. Solution: Remove the socket and re-weld the wire.
3. The spindle motor to the inverter three-wire cable is broken. Recognize the method: the resistance between the two plugs of the multimeter cable. Solution: Connect the disconnection or change the line.
The above three steps are the primary solution to the problem of the spindle motor of the CNC carpenter engraving machine. When the customer encounters the spindle stop problem, it can be cleaned and solved according to the fault phenomenon. Graphics.
