Stone engraving manufacturers are currently using stone engraving machines as the most important tool for mechanized production, thus completing the production process of stone carving. However, many of these manufacturers do not use this machine correctly. Today, let me introduce you to the correct use of the engraving machine.
Anyone who uses an engraving machine knows that the engraving machine is a numerical control machine. Therefore, before using the engraving machine, all the values of the engraving machine should be zeroed. Otherwise, deviations will occur during engraving, and it is impossible to complete the engraving according to the pre-designed trajectory and typesetting.
Secondly, the running power of the engraving machine is relatively large, so the stone engraving machine manufacturer will design a water pump for the engraving machine, which is used to cool the engraving machine. When the engraving machine is used, the machine will heat up and the pump will cool the machine. Therefore, when using, ensure that the pump can perform normal cooling function. If the temperature in the pump is too high, it is necessary to replace the cold water in time.
Finally, the engraving machine's knives are not as fast as possible. In fact, the carving of different stones should have the speed of the knives that are not used. Otherwise, the knives rotate too fast, and if the stones are too hard, the problem of broken knives will occur. Therefore, when using, it is best to adjust the speed of some knives, do not let its speed too fast, which causes the problem of broken knives.
